Heli-Heli.com for Align, Gaui, Walkera, Esky
Login Contact Us About Us Policies My Account Log Out

Heli Parts
Airplane Accessories
FPV Accessories
FPV Racing
Nitro Supplies
Power Supplies
Electronic Speed Controllers (ESCs)
Tools / Supplies
Gift Certificates
> >

Bantam e-Station BC6HP

Bantam e-Station BC6HP
  • Currently 0/5 Stars.
No reviews | Write a Review









Bantam e-Station BC6HP


  User's setting-up parameters

 Lithium battery voltage type

 LiIo:3.6V, LiPo:3.7V, LiFe:3.3V

 NiCd Delta-peak voltage sensitivity

 Zero, Delicate, 5 to 20mV

 NiMH Delta-peak voltage sensitivity

 Zero, Delicate, 5 to 20mV

 NiMH Delta-peak Delay time

 1 ~ 15 min.

 Battery temperature cut-off

 20 to 80C or OFF

 Waste time between charge/discharge

 1 to 60 min.

 Trickle charge mode

 ON/OFF, up to 200mA

 Integral timer limit for safety

 10 to 720 min.or OFF

 Maximum charging capacity limit for safety

 10 to 9990mAh or OFF

 Key beep and buzzer sound


 Input power low alert

 10 to 11V




-  Operating software

   Every operating program in the unit is controlled with mutual links and communications to prevent every possible error, so it introduces the maximum safety, such as input voltage warning, reverse polarity protection and Lithium cell-count input error warning. The entire firmware can be upgraded via USB from internet download at our web page, when there needs to be changed.

- High-power and high-performance circuit

   BC6HP employs the circuit that has maximum output power of 250Watts. As a result, it can charge or discharge up to 18 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 10A. Furthermore, the cooling system is so efficient that can hold such a power without any trouble running the circuit or the operating program.

-  Individual voltage balancer for Lithium batteries

   BC6HP has an individual cell voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for voltage balancing.

-  Accept various types of Lithium battery

  BC6HP can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer 'Warnings and safety notes' section.

- Lithium battery 'Fast' and 'Storage' mode

   You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.

- Maximum safety

    Delta-peak sensitivity : The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)

    Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of charge current to avoid from feeding high current to the battery. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.

   Capacity limit : The charging capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.

    Temperature limit(*) : The temperature of the battery on charging will rise by its internal chemical reaction. If you set the limit of temperature the process will be expired forcibly when the limit has been reached.

   Processing time limit : You can also restrain the maximum processing time to prevent from any possible defect.

   Input power monitor : To protect the car battery using as input power from being damaged, its voltage always being monitored. If it drops below the lower limit the process will be ended automatically.

   Automatic cooling fan : The electric cooling fan comes into action automatically only when the internal temperature of the unit is raised.

-  Data store/load

    For users convenience, it can store maximum 10 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge. These data can be called back at any time you need and the process can be executed without program setting.

-  PC based analysis using USB communication

    For technical expert, BC6HP offers PC based program can analysis the characteristic of the battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack.

View Copter Cart
My Shopping Cart
Vias, MasterCard, Discover, American Express
Heli-Heli package tracking
Heli-Heli on Facebook
Check out our Youtube Page
Signup for the Heli-Heli Newsletter

Privacy Site Map Legal
Site best viewed using
IE 8 compatibility mode off